manualshive.com logo in svg

Roland Aproll MDX-540, User Manual

Share
Download
Roland Aproll MDX-540 User Manual Download Page 55

3-5  Starting and Stopping Spindle Rotation

WARNING: This procedure makes the machine operate. Before you perform this 

procedure, check to make sure that operation of the machine will not create any 

hazard or danger. 

Click [Start Spindle] button. 

Important Note on the Spindle Speed During Cutting 

The setting for the spindle speed made here normally does not affect cutting operations. The rotating speed during cutting 
operations is controlled by commands in the cutting data sent from the computer, and so this setting is ignored. To adjust 
the rotating X-axis during cutting operations, use an override. 

 P. 76 "4-6  Overrides"

Operation Using the Handy Panel 

You can also perform this operation using the handy panel. 

P. 77 "Chapter 5 Handy Panel"

This adjusts the speed of spindle rotation. 

This displays the present rotating speed of the 
spindle. 

Clicking this starts the spindle. Click it a second 
time to stop. 

53

Chapter 3  Basic Operation

Summary of Contents for Aproll MDX-540

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands