Roland Aproll MDX-540 User Manual Download Page 37

Page: 37 / 120

2-3 Cable Connections

Connecting the Power Cord

WARNING

Connect to an electrical outlet that complies with this machine's ratings (for volt-

age and frequency).

Provide a power supply whose amperage is 7 A or higher (for 100 to 120 V) or 4 A

or higher (for 220 to 240 V).

WARNING

Handle the power cord, plug, and electrical outlet correctly and with care. Never

use any article that is damaged.

Using a damaged article may result in fire or electrical shock.

WARNING

When using an extension cord or power strip, use one that adequately satisfies

the machine's ratings (for voltage, frequency, and current).

Use of multiple electrical loads on a single electrical outlet or of a lengthy extension

cord may cause fire.

WARNING

Connect to ground.

This can prevent fire or electrical shock due to current leakage in the event of

malfunction.

Chapter 2 Emplacement and Installation

Summary of Contents for Aproll MDX-540

























































































































Search results

Summary of Contents for Aproll MDX-540

Reviews:

Related manuals for Aproll MDX-540

Brands by name

Popular brands

Roland Aproll MDX-540, User Manual

Search results

Summary of Contents for Aproll MDX-540

Reviews:

Related manuals for Aproll MDX-540

Brands by name

Popular brands