SUPER ELF X3
– Dornier
3
1. GENERAL INFORMATION
Super Elf X3 description
SUPER ELF X3
is a Weft Feeder with
yarn separation
and direct
CAN-bus
communication
with the Loom Control. The new Permanent Magnet motor and the Reserve sensor allow very
fast reaction and accurate yarn storage control on the spool body. The new and innovative
barrier optical sensors
guarantee best performances in dust environments and with very
fine yarns.
Super Elf X3 - Technical Data
Power supply by means of the specific Roj Control Box:
100 V dc – 24 V dc
Weft feeding speed (pattern in advance info):
max 2400 m/min
Threading channel:
4.5 mm
Yarn count range:
6 Nm - 10 dTex
Noise level:
< 70 dB A
Weight:
8 kg
Working temperature:
from 10 ° to 40 °C
Storage temperature:
from –25 ° to +65 °C
Relative humidity:
max 95% (not condensed)
Pulsar HP brake description
The Pulsar HP device, performs the following two functions:
Breaking function:
to reduce the tension pick to the weft when the same is stopped by the
Electromagnet pin. This is to avoid the following problems:
a. weft breakage at the end of the insertion
b. weft loops or slack picks in the fabric.
Pull back function:
after the yarn cutting, yarn is pulled back into the nozzle.
This is to avoid that the weft gets tangled in the next weft to be inserted by the
contiguous nozzle.
Technical data of Pulsar HP
Cycles per minute:
1.200
Reaction time:
7 ms
Max torque:
11.5 Ncm
Weft pull back length:
max 35 mm
Eyelet's diameter:
6 mm
Other information about Super Elf X3
The
Part Number (P/N)
and the
Serial Number (S/N)
are printed on the
CE label.
Summary of Contents for SUPER ELF X3
