SUPER ELF X3
– Dornier
10
Insertion length
Note:
the setting “Insertion Length” is dependent on the “Reed width” parameter which is
under the “Weft Insertion” menu. It is recommended to make the Feeder operating with the
Drum set to the wider diameter and releasing the minimum number of coils possible (see
table below for reference).
Reserve Sensor
Automatic = ON
Automatic = OFF
When this is set to Automatic = ON, the Reserve Sensor automatically regulates the
take-off point at a fixed position.
• Possible setting:
Off, 0, 1, 2
To set the number of coils (windings) to be released by the
Feeder at each pick.
• Possible setting:
2 -> 16.
• Recommended setting: see note
Summary of Contents for SUPER ELF X3
