Rohm CAPTIS-M, Translation Of The Original Operating Manual

Page: 71 / 249

Assembly
122017 / 1.0 69
Flange pursuant to DIN-ISO702-1
Flange pursuant to DIN-ISO702-4
4. Screw the flange to the machine spindle with the fixing screws. For
tightening torque, see Chapter 3.2 Technical Specifications, page 62.
5. Place the collet chuck CAPTIS-M on the flange in the correct position
and tighten slightly with the fixing screws.
6. Check radial and axial run-out on the check collar of the chuck and align
if necessary.
7. Firmly tighten the fixing screws. For tightening torque, see Chapter 3.2
Technical Specifications, page 62.
 Flange mounted.