Rohm CAPTIS-M, Translation Of The Original Operating Manual

Page: 70 / 249

Assembly
122017 / 1.0 68
5.1 Personal Protective Equipment
When working on and with the collet chuck CAPTIS-M, personal protective
equipment must be worn. The owner is responsible for providing personal
protective equipment.
■ Personal protective equipment must be in perfect condition when
carrying out work. Defective safety equipment is to be replaced
immediately.
■ Observe information on personal protective equipment posted in the
working area.
Wear ear protection Wear foot protection Wear hand protection
5.2 Mounting with Flange or Base Plate
5.2.1 Flange Pursuant to DIN-ISO702-1 / DIN-ISO 702-4
Flange pursuant to DIN-ISO702-1 / DIN-ISO 702-4 see
Chapter 5.4 Optional Accessory, page 76.
1. Put machine into set-up mode.
2. Clean the fitting surfaces of the machine spindle.
3. Check the fitting surfaces of the machine spindle for radial and axial
run-out.