Rohm CAPTIS-M, Translation Of The Original Operating Manual

Page: 87 / 249

Operation
122017 / 1.0 85
1
2
Unclamping
1. Insert the safety key
(WAF 11) (1).
2. Turn anti-clockwise to unclamp.
 The collet chuck (2) moves
forwards and releases the
workpiece.
3. Remove the safety key (1).
7.4 Replacing the Collet Chuck
Warning
Crushing injuries and cuts due to start-up during set-up
work.
Flying parts may cause serious injuries.
 Assembly and replacement of parts only in set-up
mode.
 Limit speed in set-up mode.
 Ensure that the machine cannot be put into operation
unsupervised.
 No rotation without workpiece.

Wear personal protective equipment.
Operation varies depending on the interchanger used. Observe
the relevant operating instructions of the interchanger.