Rohde & Schwarz ZND Series Getting Started Download

Page: 7 / 74

Safety Information

R&S

ZND

Getting Started 1316.2407.02 ─ 52

Safety Information

The product documentation helps you use the R&S

ZND safely and efficiently. Follow

the instructions provided here and in the printed "Basic Safety Instructions". Keep the
product documentation nearby and offer it to other users.

Intended use

The R&S

ZND is intended for the development, production and verification of electronic

components and devices in industrial, administrative, and laboratory environments.
Use the R&S

ZND only for its designated purpose. Observe the operating conditions

and performance limits stated in the data sheet.

Where do I find safety information?

Safety information is part of the product documentation. It warns you about the poten-
tial dangers and gives instructions how to prevent personal injuries or damage caused
by dangerous situations. Safety information is provided as follows:

●

The printed "Basic Safety Instructions" provide safety information in many lan-
guages and are delivered with the R&S

ZND.

●

Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.

Summary of Contents for ZND Series











































































Search results

Summary of Contents for ZND Series

Reviews:

Related manuals for ZND Series

Brands by name

Popular brands

Rohde & Schwarz ZND Series, Getting Started

Search results

Summary of Contents for ZND Series

Reviews:

Related manuals for ZND Series

Brands by name

Popular brands