Rohde & Schwarz ZND Series Getting Started Download

Page: 25 / 74

Instrument Tour

R&S

ZND

Getting Started 1316.2407.02 ─ 52

●

With 2 test ports, full two-port measurements are possible; see

Chapter 6.1,

"Transmission S-Parameter Measurement"

on page 54.

However, to use port 2 of a R&S

ZND as driving port, you need one of the "bidirec-

tional measurements" options:
–

R&S

ZND-K5, for a R&S

ZND without "extended frequency range" option

R&S

ZND-K1

–

R&S

ZND-K6, for a R&S

ZND with "extended frequency range" option

R&S

ZND-K1

Maximum input levels

The maximum input levels at all test ports according to the front panel labeling or the
data sheet must not be exceeded.
In addition, the maximum input voltages of the other input connectors at the rear panel
must not be exceeded.

Use a torque wrench when screwing RF cables on the test port connectors.

4.1.7.2

USB Connectors

Four USB 2.0 connectors of type A (master USB).

The USB ports can be used to connect:

●

External PC accessories such as mouse or other pointing devices, a keyboard,
printer or external storage device (USB stick, CD-ROM drive etc.).

●

External measurement equipment such as a calibration unit, power meter or switch
matrix.

4.2

Rear Panel

This section gives an overview of the rear panel controls and connectors of the net-
work analyzer.

Rear Panel

Summary of Contents for ZND Series











































































Search results

Summary of Contents for ZND Series

Reviews:

Related manuals for ZND Series

Brands by name

Popular brands

Rohde & Schwarz ZND Series, Getting Started

Search results

Summary of Contents for ZND Series

Reviews:

Related manuals for ZND Series

Brands by name

Popular brands