Rohde & Schwarz ZND Series Getting Started Download Page 2

Page: 2 / 74

This manual describes the R&S

ZND (2 ports, 9 kHz to 4.5 GHz, unidirectional, N connectors), order no.

1328.5170.92 and its options.
Hardware Options

●

R&S

ZND-B7 "High Output Power", order no. 1338.1578.02

●

R&S

ZND-B10 "GPIB Interface", order no. 1328.5358.02

●

R&S

ZN-B14 "Handler I/O", order no. 1316.2459.05

Software Options

●

R&S

ZND-K1 "Frequency range extension to 8.5 GHz for unidirectional instrument", order no.

1328.5306.02
(not compatible with R&S

ZND-K5 and R&S

ZND-K8)

●

R&S

ZND-K2 "Time Domain (TDR)", order no. 1328.5393.02

●

R&S

ZND-K5 "Bidirectional measurements 9 kHz to 4.5 GHz", order no. 1328.5312.02

(not compatible with R&S

ZND-K1 and R&S

ZND-K6)

●

R&S

ZND-K6 "Bidirectional measurements 9 kHz to 8.5 GHz", order no. 1328.5329.02

(requires R&S

ZND-K1; not compatible with R&S

ZND-K5 and R&S

ZND-K8)

●

R&S

ZND-K8 "Frequency range extension to 8.5 GHz for bidirectional instrument", order no.

1328.5412.02
(requires R&S

ZND-K5; not compatible with R&S

ZND-K1 and R&S

ZND-K6)

●

R&S

ZND-K7 "Extended Power Range", order no. 1328.5335.02

●

R&S

ZND-K19 "1 mHz Frequency Resolution", order no. 1326.8089.02

[email protected]

Internet:

www.rohde-schwarz.com

Subject to change – Data without tolerance limits is not binding.
R&S

is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

1316.2407.02 | Version 52 | R&S

ZND

Throughout this manual, R&S

is abbreviated as R&S.

Summary of Contents for ZND Series











































































Search results

Summary of Contents for ZND Series

Reviews:

Brands by name

Popular brands

Rohde & Schwarz ZND Series, Getting Started

Search results

Summary of Contents for ZND Series

Reviews:

Brands by name

Popular brands