External Power Meters: Control Connection
Software Utility
20
Getting Started 1331.3069.02 ─ 03
8
External Power Meters: Control Connection
Before the leveling can be performed, the power meter has to be configured in the ana-
lyzer firmware and the control connection between analyzer and power meter must be
established.
8.1
R&S
NRP110T or R&S
NRP-Z58
To establish a remote control connection between the VNA and an R&S
NRP110T or
R&S
NRP-Z58, the power meter has to be connected to the analyzer via USB (see
on page 13). If "Auto Con-
fig R&S NRP Power Sensors" is enabled, the power meter is automatically configured
by the analyzer firmware, otherwise it has to be configured manually. See reference [
]
for background information.
Figure 8-1: Auto config for R&S
NRP-Z58 (R&S
ZNA)
R&S
NRP110T or R&S
NRP-Z58
