Rohde & Schwarz R&S ZN-Z3x, User Manual

Page: 44 / 62

Operation
R&S
®
ZN-Z3x
44 User Manual 1177.6381.02 ─ 03
ICU:CALKIT:FACT:READ <ICU_ID>
Reads the factory characterization (factory calkit file) from the flash memory of
the related Inline Calibration Unit to the SD-Card of the Inline Calibration Control-
ler.
Caching of factory characterization data over the comparatively slow CAN bus
connection (max. data rate 1 MBit/s) is initiated automatically
●
when the respective ICU is connected to the ICC for the first time
●
if the ICC detects that the factory characterization data on the ICU have
changed (e.g. after recalibration at Rohde&Schwarz service)
Using
ICU:CALKIT:FACT:READ
it can also be triggered manually.
On the SD-card of the ICC the calkit files of a particular ICU are maintained as zip
archives in the directory
<ICU_ID>
. From there they can be downloaded via
FTP.
The factory calkit file is named
Factory.zip
, the user calkit files are named
User1.zip
,
User2.zip
, ... (see
ICU:CALKIT:USER:WRITE
on page 45).
Parameters:
<ICU_ID> ID of a connected Inline Calibration Unit (see "ICU_ID"
on page 38)
Usage: Event
Manual operation: See "Read Factory Characterization R&S ZN-Z32/Z33"
on page 55
ICU:CALKIT:USER:READ <ICU_ID>
Reads the user characterization data (i.e. all user calkit files) from the flash mem-
ory of the related Inline Calibration Unit to the SD-Card of the Inline Calibration
Controller.
On the SD-card of the ICC the calkit files of a particular ICU are maintained as zip
archives in the directory
<ICU_ID>
(see "ICU_ID" on page 38). From there they
can be downloaded via FTP.
The factory calkit file is named
Factory.zip
, the user calkit files are named
User1.zip
,
User2.zip
, ... (see
ICU:CALKIT:USER:WRITE
on page 45).
Remote Control Commands