Operation
R&S
®
ZN-Z3x
29
User Manual 1177.6381.02 ─ 03
●
the R&S
ZN-Z30's
product ID
0x17B
and
●
the Inline Calibration Controller's 6-digit serial number, which can be read
from the mini display or the label on the back of the particular R&S
ZN-Z30).
4.1.2
Status Reporting System
The status reporting system stores all information on the instrument's current sta-
tus and on the errors that have arisen. This information is stored in the status reg-
ister and in an error output queue.
4.2
Remote Control Commands
This chapter describes all the commands that are relevant for remote control of
the Inline Calibration System
R&S
ZN-Z3x. The "List of Commands" at the end of
the manual contains all commands in alphabetic order.
Tips and tricks for operation ...
●
The use of upper and lower case letters
designates the long and
short forms of a command:
SET:LAN:SNMask = SET:LAN:SNM
●
Text parameters
are separated from the header by a space. They fol-
low the strict syntax rules for keywords.
●
Results are returned as ASCII strings terminated with
<CR><LF>
(ASCII
13 followed by ASCII 10)
●
On successful execution of a command that otherwise does not return a
result, a confirmation
0,"OK"<CR><LF>
is returned.
4.2.1
Inline Calibration Controller
ICC or system related commands.
4.2.1.1
ICC – General Functions
Commands for identification and general operation of the connected Inline Cali-
bration Controller (ICC).
Remote Control Commands
