manualshive.com logo in svg

Rohde & Schwarz R&S ZN-Z3x, User Manual

Share
Download
Rohde & Schwarz R&S ZN-Z3x User Manual Download Page 2

This manual describes the Inline Calibration System R&S

®

ZN-Z3x, comprising

the following components:

●

R&S

®

ZN-Z30 "Inline Calibration Controller", order no. 1328.7609.02

●

R&S

®

ZN-Z32 "Inline Calibration Unit 8.5 GHz", order no. 1328.7638.02

●

R&S

®

ZN-Z33 "Inline Calibration Unit 40 GHz", order no. 1328.7644.02

●

R&S

®

ZN-Z33 "Inline Calibration Unit 40 GHz, Var. 03 (TVAC)", order no.

1328.7644.03

●

R&S

®

ZN-CAN025 "CAN-bus control cable (baked out), 0.25

 

m", order no.

1339.3622.02

●

R&S

®

ZN-CAN2 "CAN-bus control cable (baked out), 2

 

m", order no.

1339.3639.02

●

R&S

®

ZN-CAN10 "CAN-bus control cable (baked out), 10

 

m", order no.

1339.3654.02

●

R&S

®

ZN-CANA "CAN-bus adapter cable (baked out), 0.25

 

m", order no.

1339.3651.02

The software contained in this product uses several valuable open source software packages. For infor-
mation, see the "Open Source Acknowledgment" on the user documentation CD-ROM (included in deliv-
ery).
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embed-
ded computing.

© 2017 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: 

[email protected]

Internet: 

www.rohde-schwarz.com

Subject to change – Data without tolerance limits is not binding.
R&S

®

 is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of their owners.

Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g.
R&S

®

ZN-Z3x is abbreviated as R&S

 

ZN-Z3x

Summary of Contents for R&S ZN-Z3x































































Reviews:

No comments

Brands by name

Popular brands

Load more brands