Rohde & Schwarz R&S ZN-Z3x, User Manual

Page: 45 / 62

Operation
R&S
®
ZN-Z3x
45 User Manual 1177.6381.02 ─ 03
Parameters:
<ICU_ID> ID of a connected Inline Calibration Unit (see "ICU_ID"
on page 38)
Usage: Event
Manual operation: See "Read User Characterization R&S ZN-Z32/Z33"
on page 55
ICU:CALKIT:USER:WRITE <Dest_UCkitFile>
Writes a user calkit file from the SD-Card of the Inline Calibration Controller to the
flash memory of the related Inline Calibration Unit.
If for some reason the user calkit file can't be transferred to the ICU, a "Calkit err"
(
status code 52) is displayed at the ICC.
If the ICU runs out of storage space for user characterization data, a "Memory
read/write error" (
error code 002) is displayed at the ICU. Use
ICU:CALKIT:
USER:DELete
to delete existing user characterizations and free the required
storage space.
Note
●
Before uploading the calkit file to the ICC via FTP, it must be packed to a zip
archive named according to DOS 8.3 filename conventions.
●
On the SD card of the ICC, the zip archive must be placed in the related ICU's
dedicated directory
<ICU_ID>
(see "ICU_ID" on page 38).
●
On the ICU the available user characterization files are maintained as
User1.zip
, ...,
User<N>.zip
. The original zip file name is lost.
Parameters:
<Dest_UCkitFile> String identifying the related ICU and the calkit file to be
written. It is composed of the ICU_ID (see
"ICU_ID"
on page 38), an @, and the name of an existing user calkit
zip file (e.g. "3186B1@new_ucal.zip").
Usage: Event
Manual operation: See "Write User Characterization R&S ZN-Z32/Z33"
on page 56
Remote Control Commands