manualshive.com logo in svg

Rohde & Schwarz FSMR series, Getting Started

Share
Download
Rohde & Schwarz FSMR series Getting Started Download Page 2

The Getting Started describes the following R&S

®

FSMR models and options: 

 

&

R&S FSMR3 1313.9200.03  

&

R&S FSMR26 1313.9200.26 

&

R&S FSMR431313.9200.43 

&

R&S FSMR50 1313.9200.50 

 

 

© 2009 Rohde & Schwarz GmbH & Co. KG 
81671 Munich, Germany 
Printed in Germany – Subject to change – Data without tolerance limits is not binding. 
R&S

®

is a registered trademark of Rohde & Schwarz GmbH & Co. KG. 

Trade names are trademarks of the owners. 
 
The following abbreviations are used throughout this manual: 
R&S

®

FSMR is abbreviated as R&S FSMR. 

 

The software contained in this product makes use of several valuable open source software packages.
For information, see the "Open Source Acknowledgment" on the user documentation CD-ROM (included
in delivery).
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embed-
ded computing.

 

Summary of Contents for FSMR series




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands