Rohde & Schwarz FSMR series, Getting Started

Page: 12 / 131

R&S FSMR Front View
1313.9723.12 1.1 E-2
1 Preparing for Operation
Chapter 1 describes the controls and connectors of the Spectrum Analyzer R&S FSMR by means of the
front and rear view. Then follows all the information that is necessary to put the instrument into operation
and connect it to the AC supply and to external devices.
A more detailed description of the hardware connectors and interfaces can be found in chapter 8.
Chapter 2 provides an introduction into the operation of the R&S FSMR by means of typical examples of
configuration and measurement; for the description of the concept for manual operation and an
overview of menus refer to chapter 3.
For a systematic explanation of all menus, functions and parameters and background information refer
to the reference part in chapter 4.
For remote control of the R&S FSMR refer to the general description of the SCPI commands, the
instrument model, the status reporting system, and command description in chapter 5 and 6.
Description of Front and Rear Panel Views
Front View
1
Display Screen see Chapter 3
2
Softkeys see Chapter 3
3
Keypad for data input
0...9
input numbers
.
input decimal point
– change sign
ESC – close input field (for uncompleted or
CANCEL already closed inputs, the original
entry is kept)
– erase the current entry in input field
(beginning of an input)
– close message window (status, error
and warning messages)
ENTER close the data input.
BACK
– erase last character input for
uncompleted input
– restore previous input (undo)
see Chapter 3