Receiver Mode
R&S
®
ESRP
161
User Manual 1175.7445.02 ─ 08
Gaussian filter with a 6
bandwidth. 6
dB bandwidths that comply with CISPR and
MIL standards are available.
●
CISPR only
Gaussian filter with a 6
bandwidth. 6
dB bandwidths that comply with CISPR stand-
ards are available.
●
MIL Std only
Gaussian filter with a 6
bandwidth. 6
dB bandwidths that comply with military
standards are available.
●
3 dB Bandwidth
Gaussian filter with a 3 dB bandwidth.
6
dB bandwidths correspond approximately to the pulse bandwidth..
3
dB bandwidths correspond approximately to the noise bandwidth.
Remote command:
[SENSe:]BANDwidth|BWIDth[:RESolution]:TYPE
IF Analysis RBW
Selects the resolution bandwidth for IF spectrum analysis
Available for IF Analysis (firmware application R&S
ESRP-K56).
Remote command:
5.3.4
Configuring the Scan
The following settings for configuring the scan are available in the [Sweep] menu.
......................................................................................161
Run Continuous / Run Single
Initiates a continuous or single measurement.
See also
Chapter 5.1.7.1, "Running Scans and Measurements"
Remote command:
Selecting single and continuous measurements:
Initiating a measurement:
Edit Scan Table
Opens a dialog box to create or edit a scan table.
For more information see
Chapter 5.1.3.3, "The Scan Table"
Freq Axis (Lin Log)
Switches between linear and logarithmic frequency axis.
Common Measurement Settings