Quick Start
R&S
®
ESRP
85
User Manual 1175.7445.02 ─ 08
Zoom and the number of sweep points
Note that zooming is merely a visual tool, it does not change any measurement set-
tings, such as the number of sweep points!
You should increase the number of sweep points before zooming, as otherwise the
function has no real effect (see the "Sweep Points" softkey, described in the Operating
Manual and online help).
To zoom into the diagram
1. Display the toolbar as described in
Chapter 3.4.4.5, "Displaying the Toolbar"
2.
Click on the "Zoom On" icon in the toolbar.
A dotted rectangle is displayed in the diagram.
3. Drag the lower right corner of the rectangle (either via touchscreen or a mouse
pointer) to define the area in the diagram to be enlarged.
4. Repeat these steps, if necessary, to enlarge the diagram further.
Scrolling in the zoomed display
You can scroll the diagram area to display the entire diagram using the scrollbars at the
right and at the bottom of the diagram.
Basic Operations
