Rohde & Schwarz ESRP Series, User Manual

Page: 626 / 1094

Remote Control
R&S
®
ESRP
623 User Manual 1175.7445.02 ─ 08
<m> 1...16
Selects the marker.
Parameters:
<SearchArea> VISible
Performs a search in the visible frames.
Note that VISible is ignored if Spectrogram is not visible for any
reason (e.g. if the Spectrum Analyzer is in full screen mode or
display update is inactive).
MEMory
Performs a search over all frames in the memory.
*RST:
VISible
Example: CALC:DELT:SGR:SAR MEM
Performs a search over all frames in the memory.
Manual operation: See "Select Search Area" on page 184
CALCulate<n>:MARKer<m>:SGRam:XY:MAXimum[:PEAK]
This command positions the specified marker on the current peak level of the spectro-
gram. The possible position depends on the marker search area.
The command is available for the spectrogram.
For more information, see
CALCulate<n>:MARKer<m>:SGRam:SARea
on page 622.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example: CALC:MARK2:SGR:SAR VIS
CALC:MARK2:SGR:XY:MAX
Activates and positions marker 2 on the peak level in the visible
Spectrogram.
Usage: Event
CALCulate<n>:MARKer<m>:SGRam:XY:MINimum[:PEAK]
This command positions the specified marker on the current minimum level of the
spectrogram. The possible position depends on the marker search area.
The command is available for the spectrogram.
For more information, see
CALCulate<n>:MARKer<m>:SGRam:SARea
on page 622 .
Suffix:
<n>
.
1...4
Selects the measurement window.
Remote Commands in Receiver Mode