Instrument Tour
R&S
®
RTE
30
Getting Started 1326.1026.02 ─ 08
●
If the waveform is selected: Pressing the key opens the "Vertical" dialog box
for the appropriate channel.
The vertical rotary knobs are focused on the selected waveform. They are illumi-
nated in the color of the selected waveform.
[REF]
Opens the "Reference" dialog box, where you can configure and display refer-
ence waveforms. Press the key repeatedly to switch the reference waveform.
If a reference waveform is selected, the vertical rotary knobs are illuminated in
white or light gray (default colors), depending on the selected waveform.
[MATH]
Opens the "Math" dialog box, where you can configure the calculation of mathe-
matical waveforms using various mathematic operations on other waveforms.
Press the key repeatedly to switch the math waveform.
If a math waveform is selected, the vertical rotary knobs are illuminated in brown
(default color), the brightness of the color depends on the selected waveform.
[POSITION / OFFSET] (upper knob)
The upper rotary knob changes the vertical position or the offset of the selected
waveform. The horizontal axis and the selected waveform are moved vertically.
The knob lights up in the color of the selected waveform.
Press the knob to toggle the setting. The controlled parameter and its value are
shown in the input box in the upper left corner of the screen. Turn clockwise to
move up the waveform.
●
Position indicates the vertical location in divisions.
●
Offset moves the vertical center of the selected channel to the offset value.
[SCALE]
This rotary knob adjusts the vertical scale for the selected waveform. The knob
lights up in the color of the selected waveform.
Turn clockwise to stretch the waveform. Doing so, the scale value V/div decrea-
ses.
Press the knob to toggle between coarse and fine scale adjustment.
[SIGNAL OFF]
Turns off the selected signal and selects the next channel, math, or reference
waveform.
Keys and Controls
www.allice.de
Allice Messtechnik GmbH
