Operating the Instrument
R&S
®
RTE
87
Getting Started 1326.1026.02 ─ 08
6.7.1
Using the Toolbar
Using the toolbar is easy and straightforward.
Some of the toolbar functions are one-click actions. These actions are performed
immediately when you tap the icon.
Other toolbar functions are analyzing functions. These actions are interactive
actions.
To use analyzing functions (interactive actions)
1. If several waveforms are shown in the diagram, select the waveform that you
want to analyze.
See:
2. Tap the icon of the function in the toolbar.
3. To define the analyzed area, do one of the following:
● Tap the required diagram.
● Drag a rectangle on the diagram.
To select a function on a toolbar menu
Icons with a little triangle in the lower right corner show the last selected function.
A short tap on the icon activates the displayed function. To change the function,
proceed as follows:
1. Touch the icon, and drag your finger down.
2. When the menu has opened, remove the finger.
3. Tap the required function on the menu.
The function is selected, and its icon is shown in the toolbar.
6.7.2
Configuring the Toolbar
You can configure the contents of the toolbar so that only the required functions
are displayed. Furthermore, date and time can be hidden. The toolbar configura-
tion is part of the user preferences. It is retained when you switch off and on the
instrument, and you can save it in the user preferences and user-defined preset.
Toolbar
www.allice.de
Allice Messtechnik GmbH
