Security Locks SL2000F and SL2000F-VP EN
2020-05-06
Page
2
of
12
Features
Door Lock
output to control door locking device
Status
output to signal current working mode: Armed or Disarmed
Alarm
output to indicate Door Bell and Door Alarm
Door Contact
input for detection of door status
Exit Button
input to unlock the door from the external button
INSTALLER code for programming
MASTER code switch between armed and disarmed modes
USER codes for door unlocking
Programmable length of codes
User indexing for easy administration of the codes
Nonvolatile memory
Plastic enclosure and keypad with backlight, indoor operation (SL2000F)
Metal, silver color case and keypad, outdoor operation (SL2000F-VP)
Three LEDs and buzzer
Tamper
12VDC supply
CE
Introduction
The SL2000F electronic code lock is dedicated to operate as a standalone door access control unit. It is
equipped with one relay output, two transistor outputs and three inputs. All codes and parameters programmed
to device are stored in nonvolatile memory.
There are two version of SL2000F lock:
SL2000F (plastic enclosure, indoor operation only)
SL2000F-VP (metal front cover and keys, outdoor operation available)
Both lock’s version have the identical functionality, differences are limited to the mechanical construction only.
Functional Description
REL1 and OUT1 Outputs
Note: The C1,C2…C10 parameters which appear in this manual refer to the configuration parameters
programmed to the SL2000 during Memory Reset procedure (for details see section:
Configuring the SL2000
later in this document).
