33
•
Setting any piston while a SmartCard is inserted copies the current memory level to
the SmartCard if it did not already exist on the card. The SmartCard must be
removed to be able to set pistons in a console internal memory level.
•
When a memory select piston (
M1
,
M2
,
M3
,
M4
,
M5
, or
M6
) is pressed and held, a
message appears in the Console Display indicating whether the internal memory or
the SmartCard memory is being used.
•
If an internal memory is accidentally copied to the SmartCard, or if a memory level is
to be removed on the SmartCard so the internal memory can be used instead, you can
delete the memory level from the SmartCard.
SmartCard Folders
The capacity of a Rodgers SmartCard is much greater than that of the organ’s internal
combination memory. In order to make easy use of this additional capacity, Rodgers uses the
concept of memory folders. Like a file folder, a memory folder is used to store groups of
information on the SmartCard. In this case, each folder can contain a copy of each console
memory level, plus a copy of the Crescendo sequence, Tutti and other settings. Folders on a
SmartCard are labeled A through Z.
This means that a single SmartCard can contain up to 26 different copies of all six Memory
Levels, Crescendo Sequences, Tuttis and other console settings, giving you tremendous
storage capability.
A
. . .
Z
Standard Crescendo
Alternate Crescendo
Other Settings
Tutti
I & II
M1
M6
...
When a SmartCard is first used, it is initialized to use Folder A. This folder is used until a
new folder is selected. The selected folder is saved when the card is removed and later
reinserted.
Selecting a SmartCard Folder
You have the opportunity to select a SmartCard Folder whenever a card is inserted into the
instrument.
To select a SmartCard Folder:
1. If no SmartCard is currently inserted in the instrument, insert card using
procedure outlined above and go to step 3.
2. If SmartCard is already inserted, use the following procedure to get to the
SmartCard screen:
