35
2. Once the desired Crescendo is selected, hold General Cancel (‘
0
’) and press
ALT
CRESC
. A message appears in the Console Display confirming deletion of the
stored Crescendo sequence from the SmartCard.
To remove a Tutti from a SmartCard:
1. Press and hold General Cancel (‘
0
’).
2. While continuing to hold General Cancel (‘
0
’), press
TUTTI I
or
TUTTI II
. A
message appears in the Console Display confirming deletion of the corresponding
Tutti from the SmartCard.
Storing Additional Settings on a SmartCard
Several additional settings can also be stored on a SmartCard. Changing any of these settings
causes all of them to be moved to the card (if, of course, they were not previously stored on
the card). The settings stored on the SmartCard automatically take effect when the card is
inserted. The settings stored on the SmartCard are:
Melody Note Range
Master Tuning Lock Status
Bass Note Range
Tremulant Adjustments
Wind Stabilizer status
Console Lamp Intensity
Shutter Thickness
MIDI Stop Change Send/Receive Enable
Voice Palette selections
Deleting Settings from a SmartCard
To delete these additional settings from a SmartCard:
1. Press and hold General Cancel (‘
0
’), then press
SET
momentarily. A message
appears in the Console Display indicating the settings have been deleted from the
Card.
Deleting a Memory Level from a SmartCard
To delete a memory level from a SmartCard:
1. Hold General Cancel (‘
0
’) and press the corresponding piston for the memory
level to be deleted (
M1
,
M2
,
M3
,
M4
,
M5
or
M6
).
Crescendos and Tuttis must be unlocked before they can be deleted from a
SmartCard.
Once a Crescendo or Tutti has been deleted from the SmartCard, the corresponding
internal Crescendo or Tutti immediately becomes active.
!