47
Replacing the Personal Memory Card Battery
A 3-volt lithium battery (Rodgers part #1571-003 or Radio Shack part #23-160) is required for
replacement. Replacement batteries can be obtained from your local Rodgers representative or at
many camera stores. To replace the battery without losing the contents of the Personal Memory
Card, open the battery compartment on the front edge of the card
only with the card inserted in
the console slot while the organ is on
.
Otherwise, all information on the card is lost.
With the
card inserted in the console slot, the console continues to supply power to the Personal Memory
Card while the battery is being replaced. Be sure to observe the polarity marking when inserting
the new battery.
When a Personal Memory Card, whose backup battery has become weak, is inserted in the
console slot, a message appears in the Console Display warning that the battery is low. The
message remains until General Cancel is pressed. Although the battery usually continues to
function for several days after the message first appears, it should be replaced at the earliest
opportunity.
WARNING: This is a lithium battery, which can present an explosion risk. DO NOT expose
the battery or the Personal Memory Card to fire. DO NOT attempt to recharge this battery.
