32
M I D I C o u p l e r G T A
C h a n n e l
O c t a v e
V e l o c i t y
1
N O R M
E X P
3. Rotate the Alpha dial to select Expression Velocity (EXP).
4. Press either the flashing MIDI coupler piston or General Cancel to exit.
Note: A MIDI Save may be performed to save this setting as the default See
MIDI Save
on page
41. Instead of saving, you may press and hold (0) and momentarily press SET to return MIDI
couplers to their last saved status. This also returns stop tab Voice Palette selections to their
defaults.
Keyboard Velocity
Keyboard velocity responds to the actual physical force of the player’s fingers. Depending on the
velocity curve that is set (see Keyboard Velocity on page 38), the sound gets louder relative to
the amount of force used. Organ stops are not affected by keyboard velocity.
Setting Keyboard Velocity
1. Hold the SET piston, then press the MIDI coupler piston. The piston flashes. Release both
pistons.
2. Turn the Select knob clockwise (right) until Velocity shows in the display.
M I D I C o u p l e r G T A
C h a n n e l
O c t a v e
V e l o c i t y
1
N O R M
K b d
3. Rotate the Alpha Dial to select Keyboard Velocity (KBD).
4. Press either the flashing MIDI coupler or General Cancel to exit.
Note: A MIDI Save may be performed to save this setting as the default See MIDI Save on page
41.
Instead of saving, you may press and hold (0) and momentarily press SET to return MIDI
couplers to their last saved status. This also returns stop tab Voice Palette selections to their
defaults.
Sustain
A foot switch is located on the top left edge of the Great/Pedal expression shoe. This switch
sustains MIDI sounds playing from any coupler piston. Press the switch to sustain, release to
stop.
The sustain switch can be activated or deactivated independently for each MIDI coupler.
Setting the Sustain Value for a MIDI Coupler
1. Hold the SET piston and press the MIDI coupler piston.
