22
Accessing Voice Palette
1. Press and hold the SET piston.
2. Turn on the stop to be changed. For example, select the 16' Principal in the Pedal. The
display shows:
V o i c e P a l e t t e
S t o p : P D P R I N C I P L 1 6
V o i c e :
P R I N C I P L 1 6
V I O L O N E 1 6
3. Rotate the Alpha dial to view the available Voice Palette selections. The voice may be
previewed as it is selected.
Note: See Voice Palette on page 21 for voice and stop combinations.
All stop tabs return to their default voices when the organ is turned off, or when you press and
hold General Cancel (0) and momentarily press SET.
Note: Beside returning stop tabs to their default voices, pressing and holding (0) and
momentarily pressing SET also returns MIDI couplers to their last saved status. See MIDI
(Musical Instrument Digital Interface) on page 27.
Master Volume Control
Special situations and individual preferences sometimes require a temporary change in the
overall volume of the organ. This is easily accomplished.
Adjusting Master Volume
To access the Master Volume from QuickMenu (see QuickMenu™ on page 4), press the
QuickMenu piston and turn the Select knob clockwise to display the Audio Controls category.
Press QuickMenu again. Turn the Alpha dial to change the volume level.
Or:
1. Press and hold the SET piston.
2. Turn the Select knob clockwise to display the Audio Controls menu (the first item in this
menu is Master Volume).
A u d i o C o n t r o l s
M a s t e r V o l u m e
0. 0 0
3. Release the SET piston and rotate the Alpha dial to obtain the desired volume level.
Note: An Audio Save may be performed to save this setting as the default. See the next section.
