50
FACTORY DEFAULT COMBINATION SETTINGS
The Rodgers T807 is shipped from the factory with default settings on combination memories
M1, M2, and M3. Registrations on these memories can be changed, but if the original factory
default settings are desired, they can be restored by performing the following procedure.
Restoring Factory Default Combination Settings
1. Press and hold the memory piston to be restored (M1, M2, or M3) for approximately five
seconds. The display shows LOCKED or UNLOCKED.
2. While holding the memory piston, press and hold SET for an additional five seconds. The
display shows MEMORY n FACTORY DEFAULT.
3. Release both pistons.
Note: Each memory must be individually restored by performing the above procedure.
