Rodenstock REM 4000, Instruction Manual

Page: 28 / 102

■
3-2
● PictBridge printer
Insert the cable plug B (3) of the USB cable into the USB connector (PICT)
(4) on the side of the main unit in the correct orientation.
Connect the other cable plug A (1) of the USB cable to the printer.
Refer to the instruction manual of the PictBridge printer for details on how to
connect the printer.
(Fig. 1)
c) External ID input device
Plug the connector of the external ID input device (e.g. barcode reader, card
reader, keypad, and keyboard) into the USB-H terminal (1) on the side of
the main unit, confirming the correct orientation.
(Fig. 1)
d) Connecting the personal computer
■ The network support system “TOMEY Link” (optional) or the inspection data
receiving software “DATA Transfer” (included in the package) is required for
data communication with the instrument.
■ Refer to the corresponding operation manual for installation, settings, and
operation of TOMEY Link and DATA Transfer.
■ Connection setting on the System Setup screen must be completed before
connecting TOMEY Link and DATA Transfer. Refer to “3.7.4 Connection &
Print” for the setting method.
■ Be sure to make network settings under the consent of your network
administrator.
■ For LAN connection, be sure to connect the unit to a computer via a hub. The
instrument does not work correctly when directly connected to a computer.
● Connecting LAN cables
Prepare the following items.
- LAN cables (straight type, category 5 or higher)
: 2
- A network hub (A 100MHz switching hub recommended) : 1
- A computer with TOMEY Link or DATA Transfer installed : 1
(2)
(3)
(1)
(4)
(1)