63
��
Input
Display message
Comment
…
Enter the number of the first turnout of the
route, in this case turnout number 5 set to
a branch line.
After entering the number “5”, the number
flashes until the next step of the route has
been configured.
/
Use the arrow keys to define the direction
of travel (left arrow key = straight
/
right arrow key = branch
). The turn-
out number now stops flashing and the
free character slots are now populated
with “0”.
Note:
The turnout is not saved if you press
only the “Light /OK” key without a config-
ured route.
/
Enter the next turnout after pressing Shift and the arrow keys. Continue
as with the previous steps.
Press “Light/OK” once all turnouts have
been entered. You are then returned to
the start screen.
Press the “Loco/Turnout” key to access
locomotive mode.
Please read the third part of this manual starting on page 66 for additional information about editing or
deleting routes.
2.7.2 Activating and Deactivating Routes
1. Switch the
multi
MAUS
PRO
to route mode (previous Chapter 2.7.1).
2. You can view other routes using the arrow keys.
3. Press “Light /OK” to activate a route. The turnout symbol flashes briefly in the display and the turnouts
of the route are switched. The following turnout symbol indicates activated routes: .
The route remains active until it is either deleted, edited (see Part 3 “Menus”), or a turnout of the route is
switched individually.
If a turnout saved in a route is switched regardless of the route, the route is deactivated. The following
turnout symbol indicates a deactivated route:
. However, the route is automatically reactivated if the
turnout is switched back to the position saved in the route.
The switched turnout(s) returns to the position saved in the route when the route is activated with “Light /
OK.”
4. Press “Loco/Turnout” to return to locomotive mode.
The
multi
MAUS
PRO
is switched by creating a new route or opening route mode. You now open route mode
by pressing the “Loco/Turnout” key instead of switching from the locomotive to the turnout mode. How-
ever, you can undo this action by pressing “Shift” and “Loco/Turnout” simultaneously while in route
mode (see also Menu 4 on page 79).
