57
��
2.4 The Emergency Stop Functions
When a situation becomes dangerous: You can use the “STOP“ key at any time to prevent a more serious
calamity immediately. In order to avoid shutting down the entire system however, you can use the “selective
locomotive stop” function to stop only the locomotive selected and displayed.
To save battery life, the
multi
MAUS
PRO
switches itself off if not used for a certain amount of time (value can
be set in menu 3.7, page 78). This action disconnects the entire system from the mains power supply (fac-
tory setting) and causes the yellow LED on the
multi
ZENTRALE
PRO
to flash.
If you are switching the
multi
MAUS
PRO
back on (“Light /OK” key), the last used locomotive is displayed and
the “STOP” symbol flashes. Simply press the “STOP” key to restart train operation. The yellow LED stops
flashing on the
multi
ZENTRALE
PRO
and the green LED once again depicts a steady light.
The
multi
ZENTRALE
PRO
offers another option for an emergency stop. In case of an emergency, press the
white “Connect” key to disconnect the power supply to the system. Pressing the same key again switches
the system back on.
2.4.1 Emergency stop
Press the “STOP” key to sever the voltage at the track at once. The STOP symbol then appears in the display
and the yellow LED flashes at the
multi
ZENTRALE
PRO
. Press the “STOP” key again to supply the system with
voltage again.
Stop
Driving
See the operating manual for the functions which are available for your locomotive.
• You switch the
locomotive light
on or off using the “Light /OK” key. The star “ ” at the bottom right of the
display lights up to confirm that the locomotive lighting is switched on.
On
Off
