Rockwell Automation PowerFlex 525, Configuration

Page: 101 / 136

101 of 136
About Drives and Motion Accelerator Toolkit (DMAT)
Publication IASIMP-QS019 is a quick start guide that provides step by step instructions for using the Drives and Motion
Accelerator Toolkit to help you design, install, operate, and maintain a drive system. Included are selection tools, layout and
wiring drawings, and pre-configured logic and HMI files to assist you in creating an Integrated Architecture solution for your
application requirements.
All the supporting files are included on the Drives and Motion Accelerator Toolkit (DMAT) DVD, publication IASIMP-SP017. The
DVD provides drive selection tools; CAD drawings for panel layout and wiring; basic status, control, and diagnostic logic files;
FactoryTalk View ME and SE faceplates, and more. With these tools and the built-in best-practices design, the system designer
is free to focus on the design of their machine control and not on design overhead tasks. You can also download these same
supporting files from the Rockwell Automation Integrated Architecture Tools website, http://www.ab.com/go/iatools on the
Beyond Getting Started tab.
In this section, the FactoryTalk View project has already been made. You will explore the runtime application.
NOTE: If the FactoryTalk Runtime application is not currently open, you may reference the Lab Configuration Guide to re-open
the file.