Rockwell Automation DEVICENET 1771-SDN, User Manual

Page: 40 / 139

Publication 1771-6.5.132 - June 2000
3-2 Hardware Setup
Installing the PLC-5
Processor
Refer to the following figure while installing your PLC-5 processor.
Setting the I/O Chassis Backplane Switches
Set the backplane switches in the 1771 I/O chassis for 1-slot
addressing for the example application. To do this, put switch 4 in the
OFF position and switch 5 in the ON position.
Switches Addressing
4 5
OFF OFF 2 - slot
OFF ON 1 - slot
ON OFF 1/2 - slot
ON ON Not Allowed
For information on setting the other backplane switches
for your system, refer to the ControlNet PLC-5
Programmable Controllers User Manual Phase 1.5,
publication 1785-6.5.22.
Card Guides
Battery
Battery
Battery
PLC-5/40C Processor
Lift Ejector Tab
Locking Bar
Connector
Cover
ControlNet Node Address Switches
PLC-5C Processor and 1771 I/O Chassis
DH+ Address
Switches
(on back)
1
2
3
4
5
6
7
8
O N O FF
1771 I/O Chassis
ON
OFF
More