Publication 1771-6.5.132 - June 2000
Creating and Running the Example Application Program
6-11
Testing the Example Program
1.
After the download is complete, go
online
and put the PLC-5
processor in
Run
mode.
2.
Press and release the
START
button on the RediSTATION. The red
light should turn on. On your screen, you should see rung 1 in
your ladder program being energized as you press the button.
3.
Pass your hand back and forth over the photoeye several times. On
your screen you should see the counter incrementing.
4.
Press and release the
STOP
button on the RediSTATION. The red
light should turn off. On your screen, you should see rung 2 in
your ladder program being energized as you press the button.
This completes the Ethernet example.
Summary of Contents for DEVICENET 1771-SDN
