Rockwell Automation Publication 2198-RM006A-EN-P - December 2020
27
Chapter 2 Servo Drive and System Comparisons
AC Input Power Cable
Length and Fuse Protection
This section provides information to assist you in determining the wiring and
fusing requirements of the drives.
AC Input Power Cable Lengths
In general, the recommended drive replacement should not require changes in
wiring length. However, the routing can need to change as the input power on
the Kinetix 5300 servo drive is located on the top of the drive, while the same
connection is located on the front of the Ultra3000 servo drive.
See
, Connectors and Field Connections for a comparison of the
Ultra3000 servo drive and Kinetix 5300 servo drive terminals.
Figure 6 - Ultra3000 Servo Drive Input Power Example
BULLETIN 1394 300W SHUNT MODULE
ALLEN-BRADLEY
FOR USE WITH 1394-SJT22-X SYSTEM MODULE
CAT.
PART
SER.
INPUT DC
INPUT AC
FOR FUSE REPLACEMENT USE:
BUSSMAN CAT. NO.
R
Shunt Module
1606-XL
Power Supply
Input
Allen-Bradley
Bulletin 2090 Active or Passive Shunt Module
(optional component)
2098-DSD-
xxxxx
Ultra3000 Drive
(2098-DSD-
xxx
-SE drive is shown)
Three-phase
Input Power
2090-UXLF-
xxx
AC Line Filter
(optional component)
Line
Disconnect
Device
Input
Fusing
1606-XL
xxx
24V DC
Control Power
Control Power
Supply Input
Input Sensors and
Control String
2090-U3
x
BB-DM
xx
Drive-mounted
Breakout Board for I/O
and Commands