Rockwell Automation Allen-Bradley PanelView Plus 400, User Manual

Page: 57 / 193

1 Publication 2711P-UM001D-EN-P - September 2005
Chapter
4
Configuration Mode
Chapter Objectives
This chapter shows how to use the configuration screens of your
PanelView Plus terminal to:
•
Perform data entry and navigation
•
Load an ME application
•
Run an ME application
•
Modify application settings
•
Modify terminal settings
Start Configuration Mode
When you reset or start up the terminal, you should automatically
enter Configuration Mode. Your application will automatically run on
startup if you configured this option under Terminal Settings>Startup
Options.
If you are unable to enter configuration mode, refer to Chapter 8 on
Troubleshooting.
To access Configuration Mode from a running application:
•
Press the Goto Configuration Mode button.
This button is added to application screen in RSView Studio.
The application stops running but is still loaded.
To activate buttons:
•
on keypad terminals, select the
corresponding function key [Fx]
•
on touch screen terminals, tap the
button with your finger or stylus.
•
if a mouse is attached, make
selections with the mouse.
Name of application that is currently loaded.
Only appears if application is loaded.