Rockwell Automation Allen-Bradley 2198-E1004-ERS Migration Manual Download

Page: 37 / 75

Rockwell Automation Publication 2198-RM004C-EN-P - March 2022

Chapter

Connectors

Connectors on the Kinetix® 300 servo drives and on the Kinetix 5100 servo
drives are of different types in different locations. Make sure that your cables
are long enough for the differences.

Kinetix 300 Servo Drive
Connector Locations

The connectors of the Kinetix 300 servo drive are shown in

Figure 10

. Although

the physical sizes of the Kinetix 300 drives vary, the location of the connectors
and indicators is identical.

Figure 10 - Kinetix 300 Connector Locations

0 0

3 0 0

Kinetix 300 Drive, Top View

(2097-V33PR5 drive is shown)

Kinetix 300 Drive, Front View

(2097-V33PR5 drive is shown)

Kinetix 300 Drive, Bottom View

(2097-V33PR5 drive is shown)

Table 42 - Kinetix 300 Drive Connectors

Item

Description

Item

Description

Mains (IPD) connector

Ground lug

Status and diagnostic display

Shunt resistor and DC bus (BC) connector

Memory module socket

Back-up power (BP) connector

Ethernet communication port (Port 1)

Display control push buttons (3)

I/O (IOD) connector

Motor power (MP) connector

Motor feedback (MF) connector

Safe Torque Off (STO) connector

Summary of Contents for Allen-Bradley 2198-E1004-ERS












































































Search results

Summary of Contents for Allen-Bradley 2198-E1004-ERS

Reviews:

Related manuals for Allen-Bradley 2198-E1004-ERS

Brands by name

Popular brands

Rockwell Automation Allen-Bradley 2198-E1004-ERS, Migration Manual

Search results

Summary of Contents for Allen-Bradley 2198-E1004-ERS

Reviews:

Related manuals for Allen-Bradley 2198-E1004-ERS

Brands by name

Popular brands