Rockwell Automation Allen-Bradley 2198-E1004-ERS Migration Manual Download Page 35 | Manualshive

Page: 35 / 75

background image

Rockwell Automation Publication 2198-RM004C-EN-P - March 2022

35

Chapter 2 Replacement Considerations

Kinetix 5100 Servo Drive Configuration Port

Configuration of the Kinetix 5100 is performed over a mini-USB to personal
computer cable (2198-USBC and USB filter 2198-USBF) connected to the drive.
KNX5100C software is used to configure the drive.

Kinetix 300 Servo Drive Control Port

The Kinetix 300 drive can accept commands from controllers over the Ethernet
port, by using a Class 1 Ethernet/IP connection (I/O assembly) or Class 3
connection by using Explicit messaging. Kinetix 300 drives support a star
topology natively or a linear/ring topology using a 1783-ETAP module.

Kinetix 5100 Servo Drive Control Port

The Kinetix 5100 servo drives can accept commands from controllers over the
Ethernet port, by using a Class 1 EtherNet/IP connection (with a pre-defined
Add-On-Profile) or Class 3 connection using Explicit messaging.

All Kinetix 5100 servo drives include two RJ45 ports that support 10/100 Mb
communication speeds. Ethernet topologies including linear, ring, and star.

For more information on Ethernet design considerations, see:

•

Scalability - The Best Approach to Change, publication

•

Ethernet Design Considerations Reference Manual, publication

•

EtherNet/IP Design, Commissioning, and Troubleshooting Quick
Reference, publication

.

Programming Software

The Kinetix 300 uses MotionView OnBoard software that is contained within
the drive itself for configuration and programming.

The Kinetix 5100 drive uses KNX5100C software for configuration. Depending
on the drive mode, programming the drive uses KNX5100C, Studio 5000®, or
Connected Components Workbench™ software. For information on using
KNX5100C software, see the Kinetix 5100 Single-axis EtherNet/IP Servo Drives
User Manual, publication

.

«
...
33
34
35
36
37
...
»

Summary of Contents for Allen-Bradley 2198-E1004-ERS












































































Reviews:

No comments

Related manuals for Allen-Bradley 2198-E1004-ERS

DS3 series servo

Brand: Xinje Pages: 120

Clavinova CLP-240

Brand: Yamaha Pages: 24

Brand: YASKAWA Pages: 172

XtrapulsCD1-EM-400/70

Brand: Infranor Pages: 13

XtrapulsCD1-a Series

Brand: Infranor Pages: 60

Brand: Eskridge Pages: 9

Brand: LG Pages: 25

Brand: LG Pages: 16

Brand: LG Pages: 14

Brand: LG Pages: 16

Brand: LG Pages: 60

Brand: LG Pages: 14

Brand: LG Pages: 42

Brand: LG Pages: 25

Brand: LG Pages: 18

Brand: LG Pages: 14

Brand: LG Pages: 25

Brand: LG Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands