Rockford Systems, LLC.
Call: 1-800-922-7533
65
SSC-1500 Part Revolution Solid-State Control
SECTION 4—PROGRAMMING
HOW TO PROGRAM THE AUXILIARY OUTPUT
(continued)
Use
↓
and
↑
on the keypad to scroll through the programmable
parameters. If you press
↓
when the arrow symbol (>) is next to Aux
Out E-Stop, the SECOND PROGRAMMABLE PARAMETERS SCREEN will
be displayed. See Figure 4.66. Press ENTER when the arrow symbol
(>) is next to the parameter you want to program. A screen similar to
the one shown in Figure 4.67 will be displayed.
Once you are in the programming screen of the parameter you want to
program, use
↓
and
↑
on the keypad to reach the setting you desire
for that parameter. Press
ENTER
to finish.
Press
ESC
when finished to return to the MAIN PROGRAM SCREEN.
Figure 4.66
Second Programmable Parameters Screen
>Aux Out Logic
Figure 4.67
Example of Programming Screen
PROGRAMMING:
Aux Out Batch Count
OFF
(Continued on next page.)
