Rockford Systems, LLC.
Call: 1-800-922-7533
53
SSC-1500 Part Revolution Solid-State Control
SECTION 4—PROGRAMMING
Figure 4.42
Network Settings Screen
PROGRAMMING:
Network Address
0_
Figure 4.40
Security Code Screen
ENTER SECURITY CODE
_ CODE
Figure 4.41
System Setup Screen
Reference Cycle
Restore Defaults
Security Code
>Network Settings
HOW TO PROGRAM THE NETWORK SETTINGS
Select the
ON
position of the program OFF/ON selector switch. One of
the MAIN PROGRAM SCREENS will be displayed.
On the MAIN PROGRAM SCREEN, use
↓
and
↑
on the keypad the to scroll
through the program options. Press
ENTER
when the pound symbol (#) is
next to SYSTEM SETUP. The security code screen will be displayed. See
Figure 4.40. You will be prompted to enter the security code.
Press
ESC
to stop and return to the MAIN PROGRAM SCREEN. Press
BKSP
to backspace or press
CLR
to delete the entry and start over.
Press
ENTER
when finished.
After the correct security code has been entered, the SYSTEM SETUP
SCREEN will be displayed. See Figure 4.41.
Use
↓
and
↑
on the keypad to scroll up and down. Press
ENTER
when the arrow symbol (>) is next to Network Settings. The NETWORK
SETTINGS SCREEN will be displayed. See Figure 4.42.
Use the keypad to enter a network address between 0 and 32. Press
ENTER
when finished.
Press
ESC
when finished to return to the MAIN PROGRAM SCREEN.
