Rockford Systems, LLC.
Call: 1-800-922-7533
41
SSC-1500 Part Revolution Solid-State Control
SECTION 4—PROGRAMMING
Programming Overview
The following sections outline the programming of the SSC-1500
press control on a part revolution press after installation of all
components has been completed, and the
Power-Up Procedure
and
Main Run Screen Overview
sections of this manual have been read
and understood.
MAIN PROGRAM SCREENS
The SSC-1500 press control has two main programming screens from
which you can access all of the programmable features of the control.
To program the control, select the
ON
position of the program OFF/ON
selector switch. The first MAIN PROGRAM SCREEN will be displayed.
On the screen, a pound symbol (#) will be next to one of the following
program options from the list as shown. USER INPUTS is at the top of
the list. See Figure 4.5.
Use
↓
and
↑
on the keypad to scroll through the program options. If
you press
↓
when the pound symbol (#) is next to SYSTEM SETUP, the
second MAIN PROGRAM SCREEN will be displayed. See Figure 4.6. If
you press
↓
when the pound symbol (#) is next to VAR SPD SETTINGS,
the third MAIN PROGRAM SCREEN will be displayed. See Figure 4.7.
When the pound symbol (#) is next to the program option you want
to edit, press
ENTER
. Once the new information is input and
ESC
is
pressed, the display returns to the MAIN PROGRAM SCREEN. If
incorrect information has been entered, return to the setting and
reenter the correct information.
Each program option is described in detail on the following pages.
USER INPUTS......................................................42 - 45
BRAKE MONITOR ...............................................46 - 48
COUNTER...................................................................49
SYSTEM SETUP..................................................50 - 53
ANGLE SETTINGS...............................................54 - 55
TIMED SETTINGS................................................56 - 57
OPTIONAL MODES..............................................58 - 60
VARIABLE SPEED SETTINGS............................61 - 62
PLS OUTPUTS............................................................63
AUXILIARY OUTPUT...........................................64 - 65
Figure 4.5
First Main Program Screen
#1. USER INPUTS
2. BRAKE MONITOR
3. COUNTERS
4. SYSTEM SETUP
Figure 4.6
Second Main Program Screen
#5. ANGLE SETTINGS
6. TIMED SETTINGS
7. OPTIONAL MODES
8. VAR SPD SETTINGS
Figure 4.7
Third Main Program Screen
#9. PLS OUTPUTS
0. AUXILIARY OUTPUT
Photo 4.1
Keypad/Display with Program OFF/ON
Selector Switch
