Roche URISYS 2400 Operator'S Manual Download Page 160

Page: 160 / 166

Glossary

URISYS 2400

Urinalysis system - Water supply tank

Roche Diagnostics

G-4

Operator’s Manual · Version 1.0

Urinalysis system

A system consisting of an

analyzer and reagents (test strips), designed for the
chemical analysis of urine samples.

Urine analytes

The constituents in the urine

sample whose concentrations are to be determined.

URISYS 2400 cassette

An innovative cassette

manufactured by Roche Diagnostics for the most
convenient loading of test strips onto the
URISYS 2400

analyzer, supporting its fully

automated operations.

User interface screen

See Touch screen.

Water supply tank

This tank is located externally

and supplies deionized water to the analyzer. It has a
maximum capacity of 5 liters (5.3 quarts). This is
enough to process approximately 1000 samples.

Summary of Contents for URISYS 2400







































































































































































Search results

Summary of Contents for URISYS 2400

Reviews:

Roche URISYS 2400, Operator'S Manual, Page: 160 / 166

Search results

Summary of Contents for URISYS 2400

Reviews: