Robox 3d printer, User Manual

Page: 74 / 122

74 74
www.cel-robox.com
5.0 AutoMaker Software
•
Bridges Print Speed (mm/s)
This parameter sets the speed at which bridges (unsupported layers between
two existing surfaces) are printed in millimetres per second. The ability to
span unsupported areas depends on the material and cooling. Going too
slow will result in sagging, too fast will result in broken strands. Generally
bridging runs slower than perimeters.
•
Gap Fill Print Speed (mm/s)
This parameter sets the speed at which small gaps are printed in millimetres
per second. Filling in small gaps results in the head quickly oscillating and
the resulting shaking and resonance could have a detrimental affect on the
print. A smaller value here can guard against this. A setting of zero disables
gap filling completely.
•
Help Text
This box displays a brief explanation of the setting which is highlighted
(changes on mouseover).