RoboVent FloorSaver Series, Owner'S Manual

Page: 8 / 60

7 ROBOVENT • DFS SERIES OWNER’S MANUAL
SECTION 200
Features of DFS Series Collectors
(continued)
6. Automatic Maintenance Indication
The ePad Controller constantly monitors the
differential pressure between the dirty and clean
sides of the cartridge filters letting you know when
the filters should be changed. The ePad is preset
with default settings to assure the longest life of
your filters. Default settings can be changed to
meet your particular situation. See
Appendix A for
changing the default setting of the ePad Controller.
7. Control Panel Station
The DFS Series come fully equipped with all
needed controls in one compact, control panel. The
ePad Controller can be accessed from the front
panel allowing ease in changing the ePad Controller
settings. (see Figure 5).
8. Sturdy 10 GA Reinforced
Collector Housing Construction
This heavy-duty construction secures a lifetime
of industrial use. Seams are robotic welded and
ground to assure there are no leaks or cracks that
could contaminate the facility air system. Each unit
is pre-tested for air leaks during construction and
again before installation.
9. Large Dust Storage Capacity
Your DFS unit comes equipped with an oversized
dust tray. (see Figures 6). The dust tray is designed
to capture and store particulate pulsed off the filter
cartridges and minimize “re-entrainment.”
(Re-entrainment is the term used for picking up
dust that has already been removed from the filter
and re-depositing it on the filter.)
FIGURE 5
FIGURE 6