RoboVent FloorSaver Series, Owner'S Manual

Page: 48 / 60

A-7 ROBOVENT • DFS SERIES OWNER’S MANUAL
APPENDIX A
ePad Operator Instructions
(continued)
BAR GRAPH CONTROL -
(values are in kPa)
High Limit: controls the position of the top
pointer. Often set at the same value as the
Service Message.
Low Limit: controls the position of the
lower pointer. Often set at the same value
as teh Offline Trigger.
Scale Maximum: sets the overall range of
the display. Usually set at 4.00.
THRESHOLD SETTINGS -
(values are in kPa)
These are
∆
P values across the filters.
Offline Trigger:
controls at what point the
Unit begins to pulse while running.
Online Trigger:
controls at what point the
Unit will pulse after shutdown.
Service Message:
controls when the
‘Service Filters’ message is displayed.