ROBOT S6
‒
By touching each area with your finger the relevant functions are displayed.
‒
There are two automatic wrapping cycle controls: standard CONTROL and MULTI-LEVEL CONTROL (from
the screen “layer home”).
‒
MULTI-LEVEL CONTROL allows you to divide the height of the product in
5
different levels, all of which
can be adjusted in thickness, and for each one of them it is possible to regulate the tightness of the
film, the drawing (on motorized carriages only), the reinforcements, the rotation speed of the machine
and the speed of the carriage.
‒
Each one of the
5
levels can be set with values depending on the direction of the carriage, which can
also be different between ascent and descent.
N.
Name
Function description
1
"Home" screenshot.
The screenshot is displayed at the activation of the
Reset control.
The page displays the wrapping parameters
currently in use and gives access the other pages.
1.1
"Home layers"
screenshot.
The screenshot is displayed at the activation of the
push-button on the right of the various recipes of
the "Recipes" screenshot.
The page displays the wrapping parameters
currently in use and gives access the other pages.
2
"Manual handling"
screenshot.
The screen displays the controls to activate the
handling in “manual mode”.
3
"Recipes"
screenshot.
The screenshot displays the controls to activate the
desired recipe.
4
"Wrapping cycle"
screenshot.
The screenshot displays the controls to program the
wrapping cycle.
5
Screenshot “GENERAL
PARAMETERS”.
The screenshot displays the controls to program the
configuration parameters of the machine.
6
"Production
counters (pallets")
screenshot.
The screenshot displays the controls to check the
quantity of pallets made (partial and total).
7
"Enabling (H.M.I.)"
screenshot.
The screenshot displays the controls to customize
the operating mode of the user interface".
8
"Password
modification"
screenshot.
The screenshot displays the controls to modify the
access password to the protected functions.
9
"Password insertion
(user login)"
screenshot.
This screen displays the controls used to enter the
password for the user selected, in order to access
the restricted functions.
10
"Service"
screenshot.
The screenshot is only reserved to the
Manufacturer's Support Service to perform the
diagnostics and the basic programming.
11
Wrapping screen
with "Special
cycles".
This screen shows the controls that activate
wrapping with "special cycles".
For details on the listed screenshots, consult the description shown on the specific paragraph.
40/94
Summary of Contents for S6
