manualshive.com logo in svg

Robopac S6, Use And Maintenance Manual, Page: 11 / 94

Share
Download
Robopac S6 Use And Maintenance Manual Download Page 11

ROBOT S6

‒

Danger of arms crushing

To close the battery cover, lower it

slowly to avoid trapping your hands.

‒

Body crushing hazard

Do not linger in the machine operating

area.

‒

Body crushing hazard

Do not linger in the machine operating

area.

2.6. SAFETY WARNINGS FOR REGULATIONS AND MAINTENANCE

‒

Always keep the machine in optimum operating condition and carry out the routine maintenance

according to the intervals and procedures specified by the Manufacturer.
A good maintenance will ensure a stable performance over time, longer working life and constant

compliance with the safety requirements.

‒

Enable all machine safety devices before performing any maintenance and regulation operations.

‒

Delimitate the work area complying with the safety conditions as provided by the standards on

workplace safety in order to minimise the risks.

‒

The maintenance interventions in the areas that are not easily accessible or dangerous must be carried

out after having ensured the necessary conditions.

‒

The personnel authorised to carry out the ordinary maintenance (regulations, replacements etc.) must

possess the necessary technical and professional knowledge.

‒

Wear the Individual Protection Devices provided by the laws on workplace safety and indicated in the

"Instructions for use" and/or affixed to the machine.

11/94

Summary of Contents for S6































































































Reviews:

No comments