ROBOT S6
6.
Re-tighten the nuts up to the surface of the chain tightening pulley.
7.
Undo screw
(C)
.
8.
Refit the guard
(A)
.
5.6. BRAKE ADJUSTMENT
Proceed as indicated.
1.
Lift the machine and rest it on a support.
2.
Make sure that the machine is resting correctly, to prevent the risk of crushing during the operation.
3.
Remove the guard
(A)
.
4.
Loosen the locking nuts
(E)
.
5.
Using a thickness gauge
(B)
, insert a spacer of
0,25 mm
near the screw
(D)
.
6.
Adjust the distance
(C)
between the magnet and the flange using the screw
(D)
until you feel a slight
resistance on the thickness gauge.
7.
Repeat the intervention near the other screws.
8.
Using a thickness gauge, try to insert between the magnet and the flange, at the screws
(D)
, a spacer
of
0,3 mm
.
The intervention is considered to be carried out correctly if it is not possible to insert the thickness
gauge.
9.
Tighten locknuts
(E)
.
10.
Refit the guard
(A)
.
36/94
Summary of Contents for S6
