manualshive.com logo in svg

Robopac S6, Use And Maintenance Manual, Page: 26 / 94

Share
Download
Robopac S6 Use And Maintenance Manual Download Page 26

ROBOT S6

4. INFORMATION ON HANDLING AND INSTALLATION

OPERATIONS

4.1. RECOMMENDATIONS FOR HANDLING AND LOADING

―

Before performing any operation, the authorised operator must make sure that he/she

understood the "Instructions for use".

―

Carefully read the "Instructions for use" specified in the manual and those applied directly

to the machine and/or the package.

―

Provide suitable safety conditions in compliance with the regulations on workplace safety to

prevent and minimise the risks.

―

Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED

PURPOSES and assess the possible RESIDUAL RISKS.

4.2. PACKAGING AND UNPACKING

The packing is realised, keeping the overall dimensions low, also in consideration of the transport chosen.

To facilitate transport, shipping can be performed with some components disassembled and appropriately

protected and packaged.

Some parts, especially electric equipment, are protected with anti-moisture nylon covers.

The cases are marked with all necessary information for loading and unloading.

During unpacking, check the integrity and exact quantity of components.

Packaging material should be appropriately disposed according to the laws in force.

The figures show the most common types of packages.

Packaging on pallet with protective nylon

26/94

Summary of Contents for S6































































































Reviews:

No comments